2017 XENA 5A 5- Axis CNC Horizontal Boring Mill 130mm 3.2M

Description

2017 XENA 5A 5- Axis CNC Horizontal Boring Mill 130mm 3.2M
2017 XENA 5A 5- Axis CNC Horizontal Boring Mill 130mm 3.2M
We are pleased to offer the following for your consideration:
Machine Type:
CNC - Other
Make:
Xena
Model:
5A 130mm 3.2M
Year:
2017
SPECIFICATIONS
*Includes 1 Year Warranty
**Under 500 hours use
XENA TACHYON / FAGOR
3 modes on the same 15'' touch screen.
- Manual mode
- Manual assisted mode TACHYON
- FAGOR 8070 "'CNC' 'mode, conversational, or/and G code
- Controller: 5 simultaneous axis
Note that our TACHYON / FAGOR controller has the '' TeamViewer '' interface, by which it is possible to check and diagnose machine, remotely via the internet.
Avoiding costly, and often unnecessary technician traveling when it comes only to parameters and/or programming.
SPECIFICATIONS
Table: 72 '' 'x 63' '
Max weight table 17,000 lbs
TRAVEL
x-axis 126 ''
Y axis 78.7
axis Z 78.7
axis W 35.4
Height of table : 56 ''
SPINDLE
Diameter 130mm (5.1)
Nose: BT-50 or CAT-50
Speed (RPM) 10 -2000
Spindle motor: (26HP @ 30 min)
Speed ratio 3 (gearbox)
FEED
Fast feed (X-Y-Z) 10M / min (472’’./min)
Fast feed (W): 6M / min (400’’/min)
Cutting feed: 5M / min (200’’/min)
Table '' B '': 4 RPM
ATC
Number of tools: 60 tools (BT or CAT-50) '' ARM TYPE '' (currently on BT)
Max tool weight: 55 lbs
Max tool length: 15.7
Max tool diameter: 5 (10 in. Without adjacent tools)
Change time: 15 sec.
Machine weight: 118,000 lbs
Floor space: 295 x 301 '' (See attached drawing)
Height: 213.5 ''
Voltage: 440V 60Hz 3ph
Included :
Axis "B" @ 360,000 position (+/- 10 μ) with possibility of machining in 4 simultaneous axes on the table.
Spindle cooler
Automatic power off
Hydraulic unit
Coolant system
Automatic lubrication
Alarm light tower
LED full interior lighting
M.P.G. 5 axis
Linear positioning glass scale on the X, Y, Z axes
Heat exchanger
Chip conveyors
Other accessories included: (see details at the bottom of the pages)
PROBE Renishaw (RTS + RMP60 (Q) + RMI-Q) Automatic tool length & workpiece probing system
5th axis installed on table with base (see photos below)
(Central connection from the top of enclosure for full pivoting)
Possibility of (5 axis simultaneously).
Includes:
Rotary table with a 3-jaw hydraulic chuck (20 '') with a 6 '' bore
HD rolling center with a 3-jaw hydraulic chuck (16 '')
Hydraulic brakes on both ends
CTS "Coolant" High pressure through spindle) (15bar = 215 psi)
Full enclosure (required with CTS)
W 400mm extension support (for vibration-free power machining up to the center of the table) (See photos below)
Permanent adapter for: (combined with tool changer)
2 heads at 90 degrees: (1) mini 50/30 + (1) STD 50/50 (see photos below)
1 straight extension 50/50 (see photos below)
Due to eBay's policy we do not have our contact information listed. The only way we can communicate with you is through the
Buy It Now
button.
Revelation Machinery encourages first-hand inspection of all used machinery.This machine is being sold "AS IS, WHERE IS" This is a used machine that is UNDER POWER and Available for Inspection. Please verify all of the specs listed for this machine. The Seller does not guarantee or warranty expressed or implied these specs to be accurate. It is the buyer's responsibility to confirm all specs and to make sure that this machine is the right machine for them. List prices are not inclusive of rigging or shipping charges.
Listing and template services provided by inkFrog